|
|
|
|
|
#1
03-28-2006, 03:39 AM
|
|||
|
|||
|
1989 300E Instrument Cluster Problems
My 89 300E instrument cluster is not working. When I start the car the gauges are not working (ex: speedo, rpm, oil pressure, etc...) none of the warning lights work either. The only thing that works on the cluster are the signal and hazard lights. I checked all the fuses and they are in working order.
Please help!!! Fab 
|
|
#2
03-28-2006, 09:53 AM
|
|||
|
|||
|
change out fuse #5 anyway...(8amp white)
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/showpost.php?p=831799&postcount=13 http://www.peachparts.com/shopforum/showpost.php?p=831807&postcount=14
|
|
#4
03-28-2006, 04:04 PM
|
||||
|
||||
|
recheck seating on #5 fuse and all others in the box.
there's also a rheostat(trip meter reset) I believe. I found a post in the archives that pointed to a blown rheostat.
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein"
|
|
#5
03-28-2006, 07:03 PM
|
|||
|
|||
|
Be SURE the fuses are OK.
Mine did the same thing once. I thought the fuses were fine, too. However, one fuse looked ok but it was actually physically broken...a hairline crack. I would say which fuse but I don't remember.
__________________
2012 E350 2006 Callaway SC560
|
|
#6
08-26-2006, 02:40 PM
|
|||
|
|||
|
And another happy "Fuse 5" replacer
Just adding to this thead that I too had the "gauges out and funny buzzing from behind panel except when turn signal in use" problem on my 1986 300E, and I too had visually examined all my fuses very closely in good light and thought they were all OK, but changing number 5 (which fell apart after removal) solved my problem.
|
|
#7
08-26-2006, 02:48 PM
|
||||
|
||||
|
Check post #5 in thread in link, it may help.
http://www.peachparts.com/shopforum/showthread.php?t=159843&highlight=red
|
 |
| Bookmarks |
|
|
Linear Mode
