I have a 94' S500. the botton for the glove box stopped working. I suspect a broken or stretched cable. Is there a secret to get into the glove box so I can investigate? Can I take the botton off and maybe pull the cable? I don't really want to pry on the door or button, until I know what I'm doing.

Thanx
Eric

http://www.tigbit.com/nuke/modules.php?name=Content&pa=showpage&pid=7

After you remove the tumbler, remove a screw, then that button thing comes out and it should have an insulated cable in the back. Hold the cover and pull the cable itself and it should open, there's an adjustment and that's probably your problem. Good luck and have patience, that cylinder sucks to work with.

Thanks, what a big help!!

I knew this would be needed one day. Glad I bookmarked it but the link is no longer valid...........

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)