|
|
|
#1
|
|||
|
|||
Blower motor
1990 420SEL
I Replaced the Blower Motor, the connector 3 pin ( has 4 Slots or holes)I had to open it up repair daman ged connector, the other wires came out and I don't know where they go back to, the plug is numbered 1-4 (red, Black, Yellow. Help!! C. Kimble 1990 420 SEL 1992 190E 1986 300E |
#2
|
|||
|
|||
So, you replaced the HVAC blower motor for cabin air? Right? If so, you should only have two wires going to it, a red and brown or blue.
|
#3
|
||||
|
||||
I took the photo below of my plug for the blower motor, I have the evap case out for evap and elements, the car is a 1992 300 TE. I don't know if your plug is the same or not. It sounds like you have the same number and colors for wires.
|
#4
|
|||
|
|||
Yellow wire is variable power from CC to trigger the regulator...........
|
Bookmarks |
|
|