|
|
|
|
|
|
|
#1
05-30-2006, 03:55 PM
|
||||
|
||||
|
Should shocks always be replaced in pairs?
noticed the rear shocks on my 'new' 116 are different makes. One is proper oem, and the other is a cheaper replacement (KYB). Both are ok, though the cheaper one seems to bounce 'softer' if that makes sense.
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys Last edited by chazola; 05-30-2006 at 04:09 PM. 
|
|
#2
05-30-2006, 04:04 PM
|
||||
|
||||
|
it certainly would be logical, and the way I would do it, but .....
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD  16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace
|
|
#4
05-30-2006, 06:01 PM
|
|||
|
|||
|
Picture it like this...if you have a long neck beer and a can of beer, we all know that one is TALLER than the other one...
Replace them both with the same brand, do not let yourself be lopsided like I was....
|
|
#5
05-30-2006, 07:42 PM
|
||||
|
||||
|
did you mean it is the actual shock that came from the factory or is it just a bilstein.
if it is worn out replace it. but if it is not you could simply repace with a bilstein the kyb. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.  [SIGPIC]..I also have a 427 Cobra replica with an aluminum chassis.
|
|
#6
05-31-2006, 11:12 AM
|
|||
|
|||
|
If you have to ask, then I would guess cost is a significant consideration for you. Bottom line, if ride height is even all around, and handling seems safe enough, then not replacing either will possibly be a better solution than just replacing one. If the car's behavior leaves you concerned, then replace both, since you don't know the age of either.
Steve
__________________
'91 MB 190E 2.3 '08 RAV4 Ltd 3.5 '83 Lazy Daze m'home 5.7
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
