|
|
|
#1
|
|||
|
|||
ABS Brake light on
Ok , on to the next problem ......... lol
the ABS brake light is on in my 1991 300sl , is there a way to reset or by pass it so it goes off ??? I think this is another reason why my Top does not go down , any idea's please post , Thank You very much |
#2
|
|||
|
|||
The ABS light should go off when the fault which caused it's activation is fixed. If your light is still on it means you have a faulty wheel sensor or ABS unit.
The only other reason I know for ABS warning light activation is a faulty Overload Relay, first check the fuse on top of the relay to make sure it has not blown. Overload relay is #92 in the first diagram ; http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=129060&M=103%2E984&GA=722%2E363&GM=717%2E434&CT=F&cat=515&SID=54&SGR=080&SGN=04 . |
#3
|
|||
|
|||
Thank you Shandy
were do I find the wheel senser ?? do you have a diagram for that ??is it easy to change ?? Thank you
|
Bookmarks |
|
|