as said, the window is all the way up and it doesn't go down. never did. prob rusted wormwheel. it gets power. i don't want to damage it, the threads of the stuff holding the motor are tight against the door. no movement.
what to do? brute force? HELP!

I assume no one else knows how to do it?

You must disconnect the motor's electrical connections and unbolt the motor from the door. Then the whole assembly will drop, watch the glass, and remove the slider from the channel at the bottom of the window.

I checked Braingears, but the front door sections of the manual were missing.

http://mb.braingears.com/126_DISC2/program/chassis_560SEL.htm

If necessary, I can e-mail you the missing PDF section when I get home in the morning.

__________________
Regards

Warren

Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor

Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL

ENTER > = (HP RPN)

Not part of the in-crowd since 1952.