|
|
|
#1
|
|||
|
|||
lcd temp display question
hey guys. i have an 86 300e and have a couple of questions about the lcd display/sensor. the lcd display i have currently in the car plugs into a square 4 pronged plug. i bought a newer lcd display from a 89 w124 that has five prongs. now apparently, there is a part, 013 545 32 28, that can allow the 5 pronged display to plug into the stock 4 pronged plug. have any of you guys ever heard of this part or swap?
another question is that when i look at the 4 pronged plug in the car now, it actually has 5 wires. is it possible to just cut and solder the individual wires to new lcd display? thanks again. |
#2
|
||||
|
||||
Quote:
|
#3
|
|||
|
|||
Here is the bulletin on where the wires go...
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#4
|
|||
|
|||
that's great info there. thank you so much!
|
#5
|
|||
|
|||
Thanks for the info
Got the part (013 545 32 28) from the dealer for $1.50. Now I can know the outside temperature.
__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous “Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss |
Bookmarks |
|
|