Need Tips and Instructions on how to change a starter on my 420sel
I have a 1988 , 420sel and I need to change the started need some tips,advice and instructions on how to do this ? Help
Thanks ! |
Wrong forum?
Len |
Need Tips and Instructions on how to change a starter on my 420sel
Need tips and advice or a guide on how to change my starter on my 88, 420sel , help !!
Thanks |
Purty simple. Disconnect negative battery lead. Remove control lead at starter which is phillips or straight slot. Remove B+ connector. Remove two 10mm allen bolts that hold starter in place. Remove starter. Install new starter by reversing operation.
|
The starter is quite a chore to remove. On my 560SEL, what I had to do was to drop the muffler system and then then take some shield out of the way. This was the only way I could have clearance to remove my starter. Just a heads up, make sure you have a compressor and gun because its a ***** removing them bolts by hand!
|
All times are GMT -4. The time now is 02:04 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website