|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Need Tips and Instructions on how to change a starter on my 420sel
I have a 1988 , 420sel and I need to change the started need some tips,advice and instructions on how to do this ? Help
Thanks ! |
#2
|
|||
|
|||
Wrong forum?
Len |
#3
|
||||
|
||||
Need Tips and Instructions on how to change a starter on my 420sel
Need tips and advice or a guide on how to change my starter on my 88, 420sel , help !!
Thanks |
#4
|
|||
|
|||
Purty simple. Disconnect negative battery lead. Remove control lead at starter which is phillips or straight slot. Remove B+ connector. Remove two 10mm allen bolts that hold starter in place. Remove starter. Install new starter by reversing operation.
__________________
Auto Zentral Ltd. |
#5
|
|||
|
|||
The starter is quite a chore to remove. On my 560SEL, what I had to do was to drop the muffler system and then then take some shield out of the way. This was the only way I could have clearance to remove my starter. Just a heads up, make sure you have a compressor and gun because its a ***** removing them bolts by hand!
__________________
2001 E55 2001 E320 Sedan 2001 Subaru Legacy 2006 SLK280 2016 Subaru Outback 3.6 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|