PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   93 190e EGR vacumm hose ??? (http://www.peachparts.com/shopforum/showthread.php?t=162154)

smk_texas 08-20-2006 07:29 PM

93 190e EGR vacumm hose ???
 
Hi,

The vacuum hose from the EGR valve is missing on my 93 190e 2.3. The EGR valve sits on the exhaust manifold. Where does this vacuum hose go to ??? Any ideas ?? Thanks.

smk_texas
98 s420
93 190e

Arthur Dalton 08-20-2006 09:11 PM

The vac line should go between the EGR and the SOV in front of the engine [ next to the AIR pump SOV.]

smk_texas 08-21-2006 12:28 AM

Thanks Arthur. I'll connect that and see if my check engine light goes away.

smk_texas
98 s420
93 190e

Arthur Dalton 08-21-2006 02:20 AM

Check the plastic line feeding the SOVs from the engine intake..that is the one that always cracks b/c it is plastic.

smk_texas 08-21-2006 02:24 PM

Hi Arthur,

I have a question though, what size vacuum hose should I be buying for EGR valve connection ?? Thanks.

smk_texas 08-21-2006 09:50 PM

Hi Arthur,

There are two ports (for lack of a better term) in this valve I am looking at. One at top and one @the bottom. The one at the top is connected with a elbow hose which is connected to a plastic brown hose. The bottom port is not hooked up. Is this where the hose from EGR valve hooks up ???? This valve is right behind the thermostat housing and to the right of the water temp sensor. Is this correct. ??? Thanks very much for your help.

Arthur Dalton 08-21-2006 09:56 PM

Sorry, but I do not have vac routing layout for 201 chassis,, possible someone here does?????????

smk_texas 08-22-2006 12:11 AM

1 Attachment(s)
Hi Arthur,

Attached is the picture of the valve i am looking at. Is this the one ?????Looks like I need to buy a new one because the one on the car has only one prong & the insulation is stripped. Thanks

tvpierce 08-22-2006 08:26 AM

Quote:

Originally Posted by smk_texas (Post 1253325)
Hi Arthur,

There are two ports (for lack of a better term) in this valve I am looking at. One at top and one @the bottom. The one at the top is connected with a elbow hose which is connected to a plastic brown hose. The bottom port is not hooked up. Is this where the hose from EGR valve hooks up ???? This valve is right behind the thermostat housing and to the right of the water temp sensor. Is this correct. ??? Thanks very much for your help.

I just went outside and looked at mine: The top port is the one that goes to/from your EGR valve on the exhaust manifold. That brown plastic hose should go between the valve cover and the firewall, then connect to the EGR valve. I'm not sure where the bottom one goes -- I couldn't follow it under everything on the intake side of the engine. (my guess is that it goes to a vacuum source on the intake manifold.)

jp

smk_texas 08-22-2006 01:17 PM

Thanks JP. I believe you are correct. I found a vac diagram here on the forum for a 201 and it says the same thing. I'll hook it up after I get my parts this week. Thanks again for your help

smk_texas
98 s420
93 190e


All times are GMT -4. The time now is 01:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website