|
|
|
#1
|
|||
|
|||
Clk 430
I have a 2000 CLK 430. I can start the car. the car would stay running, but when apply gas to it it won't take gas. it seems like the gas pedal does not work. I press the gas pedal it won't do anything while the gas still running. what would be the problem?
|
#2
|
|||
|
|||
clk430
this is a fly by wire car[electronic accelerator] the pedal is connected to a large rheostat pot under the hood[next to firewall in front of driver] by a cable.check that all intact.next you are going to need a scanner[mercedes specific]to check adaptions and throttle position.good benz tech should have .
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg |
#3
|
|||
|
|||
How should the throttle be positioned. I have changed the throtle, gas pedal sensing unit, the airflow meter. it still does the same thing. Would the gas pressure being low could cause that?
|
Bookmarks |
|
|