yes, if i remember right theres about 14 or so per side.

I use a 27mm or whatever it is wrench to counter hold when breaking the bolts loose.

the cam locks insert into the notches in the camshafts just behind the sprockets on both sides. with the motor at 40, they should be lined up perfectly for the locks to slide in place. bolt the locks in place with two valve cover bolts in the holes directly 'above' the sprocket.

__________________


1980 500SE/AMG Euro
1981 500SEL Euro
1982 380SEL
1983 300TD
1983 500SEC/AMG Euro
1984 500SEC
1984 300TD Euro
1986 190E 2.3-16
1986 190E 2.3
1987 300D
1997 C36 AMG
2003 C320T 4matic

past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350