|
|
|
|
|
#1
10-22-2006, 06:22 PM
|
|||
|
|||
|
Voltage regulator on 300 CE
Can anyone tell me where the voltage regulator is located on a 1991 300 CE coupe?
Antonino 
|
|
#2
10-22-2006, 06:37 PM
|
||||
|
||||
|
It's at the back of the alternator. Disconnect the car's battery, remove the 2 Philips head screws at the back of the alternator, then extract the voltage regulator. Usual failure is the brushes get too short to make good contact with the armature. You can tell because the brush contacting face will not be shiny.
Sixto 93 300SD
|
|
#3
10-22-2006, 06:50 PM
|
|||
|
|||
|
voltage regulator on 300 CE
Can anyone tell me where the voltage regulator is located on a 1991 300 CE coupe?
Thanks, Antonino
|
|
#4
10-22-2006, 07:03 PM
|
|||
|
|||
|
Voltage regulator on 300CE
Dear Sixto, thanks for your help.
Antonino
|
|
#6
10-22-2006, 08:55 PM
|
||||
|
||||
|
Nope, you're right, I read it as "blower motor regulator" for some reason.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
