![]() |
|
|
|
#1
|
|||
|
|||
need help! trunk wont open.......
ok my trunk just stop workin. i mean like the button in the car and the remote key button doesnt work anymore.. i have to manualy open it with the key. also when i activate my alarm with the key i dont see the blinging signal light anymore.. i get the blinging when i unlock the car tho.. weird it all happen in one day. any idea on how to fix this?
|
#2
|
||||
|
||||
the model would help...
__________________
![]() 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#3
|
|||
|
|||
its a 2001 clk 430
|
#4
|
|||
|
|||
Try this -
Disconnect the ground terminal from the battery for five minutes and then re-connect. Make certain you have the unlock code for your radio and know how to reset it after you do this. See the manual for your radio,
|
#5
|
||||
|
||||
memory is a little fuzzy but your PSE module should be the culprit. if the trunk mechanism doesnt seem to be working, the lights arent going to flash when you lock it because it still sees the switch for it as "open"
read out the faults in the control module.
__________________
![]() 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#6
|
||||
|
||||
I would tend to think the trunk lock is in the lock-out mode. Look in the manual, there is a section in there pertaining to the trunk lock, you put the key in and twist it one way and remove the key, and this prevents the trunk from being opened without the key.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#7
|
|||
|
|||
ok ima try to Disconnect the ground terminal and then ill look into the pse module... and gilly , that was the first thing i tried...thanks tho , but its not it =/ ill be back after testing.. thanks for all ur help guys..
|
![]() |
Bookmarks |
|
|