![]() |
|
|
|
|
#1
|
||||
|
||||
It is as easy as it looks. unbolt the six bolts and just replace the disc. washers go against the flex disc itself and the divits fit into their respective flanges in the driveshaft and trans.
__________________
![]() 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#2
|
|||
|
|||
Thanks folks for all the help!
By the way, what are the torques for the flex disk bolts? Loctite? Thanks again, Bob |
#3
|
|||
|
|||
Would a bad flex disk result in a high frequency vibration, almost like a tuning fork? I notice this at around 60mph, mostly when accelerating.
__________________
1985 380SE Blue/Blue - 230,000 miles 2012 Subaru Forester 5-speed 2005 Toyota Sienna 2004 Chrysler Sebring convertible 1999 Toyota Tacoma |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|