|
|
|
|
|
#1
11-06-2006, 07:06 PM
|
||||
|
||||
|
Door not closing tight on 94 E420 (w124)
Just noticed wind noise from the driver door on my 94 E420. Looks like all the seals are good.
What I did notice is that the door is not shutting tight enough. That is, when I look at the front passenger door, it seems to be flush with the rest of the body when closed. The driver door does not. Exactly what do I adjust to have it close tighter? Is it the striker plate on the inside of the door body? Thanks!
__________________
Willy '94 E420 White Mods ------- Berg Werks Keyless Entry Buzzer replaced with Chime Dash Light Upgrade Burlwood/Leather shift knob Alpine CDA-9815 Head Unit 2002/2003 16" C Class 7-Spoke Wheels Updated "Chip" to fix Code 19 problem 
|
|
#2
11-06-2006, 09:06 PM
|
||||
|
||||
|
Yes - I had to adjust mine a little after closing the door in a rather spirited manner. Just loosen the 2 (I think) screws a little, and the plate will move for you. If you have a white crayon, you can mark it's current position in case you're not happy with your adjustment(s).
__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein 09 Jetta TDI 1985 300D
|
|
#3
11-07-2006, 03:33 AM
|
||||
|
||||
|
Quote:
Willy
__________________
Willy '94 E420 White Mods ------- Berg Werks Keyless Entry Buzzer replaced with Chime Dash Light Upgrade Burlwood/Leather shift knob Alpine CDA-9815 Head Unit 2002/2003 16" C Class 7-Spoke Wheels Updated "Chip" to fix Code 19 problem
|
|
#5
11-10-2006, 05:45 AM
|
||||
|
||||
|
Quote:
__________________
Willy '94 E420 White Mods ------- Berg Werks Keyless Entry Buzzer replaced with Chime Dash Light Upgrade Burlwood/Leather shift knob Alpine CDA-9815 Head Unit 2002/2003 16" C Class 7-Spoke Wheels Updated "Chip" to fix Code 19 problem
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
