Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-10-2006, 08:23 AM
Registered User
 
Join Date: Jan 2006
Posts: 11
126 troubleshooting

I have a 1991 300SEL w/ 165000 miles. I really want to keep this car forever. I am trying to repair what I can now, and hopefully tear everything down in a couple of years. I have a few problems that I need help with. I am amateur mechanic and am trying to do as much as I can to save $$$.

Problem 1
Squeak in steering wheel
happens when turning left or when steering wheel is returning left to neutral position after turning right. It is not the power steering pump and it it is a short high-pitched squeak that sounds like it is coming from inside the cabin.

Problem 2
I just noticed this the other day when I had two normal weight adults in the back seat. The back end rides a little low and scrapes the road even on tiny bumps at low speed. Do I need to replace the coil springs??

Thanks in advance for your help.

Reply With Quote
  #2  
Old 11-10-2006, 09:46 AM
MattBelliveau's Avatar
Gotta another one...
 
Join Date: Jun 2005
Location: NE Ohio
Posts: 1,685
Solution 1 : Find the squeek. Coat with graphite

Solution 2 : Yes, I would say the springs are in order...and possibly subframe mounts.
__________________
1989 300E 144K
Reply With Quote
  #3  
Old 11-10-2006, 07:06 PM
Registered User
 
Join Date: Jan 2003
Location: Dallas
Posts: 796
Ah Ha, been there - done that on both your issues.

1. I had the steering-wheel squeek, very hi-pitch just under the horn.
It was the carbon brushes that make the electrical connection to the air-bag.
There is a little copper disc on the steering shaft, and the wheel contains some little carbon brushes (similar to an alternator commutator).
As you turn the wheel, the brushes slide on the copper disc to make the contact. I took the steering wheel off (including the air-bag) cleaned up the disc and brushes, and the problem went away.
You can buy new contacts, but they are pretty $$ as I remember.
Pulling the wheel is straightforward, but be sure to disconnect the battery
and the the air bag actuation connectors under the right floorboard.
It's my understanding that the bag actuation circuit contains a capacitor which can fire the bag even though the battery is disconnected.
Read up on air bags in the Forum, don't want one going pop when you pull the wheel..

2. I hate that rear-end sag. I am always amazed when I see a late-model BMW with about 10 degrees of negative camber on the rear.
They must wear out the bushings in less than a year.
Two things will bring you back up:
a. Replace the big subframe bushings just in front of the rear wheels.
There are plenty of how-to's on this forum. Throw on a rear diff rubber support also.
b. If you need more adjustment (and you probably will) pull the springs, and insert thicker rubber pads on the top of the spring.
MB offers 3 thicknesses, and they can be obtained at the dealer.
do a search here on that also. The pads have markings on them that you can see if you crawl up there and look carefully, so you can discern which thickness you now have, and buy a thicker one. I think it's 3 dots, 2 dots, etc. which correspond to 9mm, 5mm, etc.

When completed, you should have virtually zero camber, and the height
of the rear fender well should virtually match the front.

Good luck.
DG

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page