|
|
|
#1
|
|||
|
|||
89 300E Idle Control Valve
Hi! Everybody great site
Well i have a 1989 300e it idle's high but if i unplug the idle control valve it idle's normal what control's the valve also the EHA valve is leaking gas out of the small hole in the case,has anyone ever repaired one of these valves or where can i get a good used one or where can you send it to be repaired Last edited by las769; 12-14-2006 at 01:40 AM. |
#2
|
|||
|
|||
Bump
__________________
Keeping 'em Running 1990 300SEL 1994 E320 1989 E300 |
#3
|
|||
|
|||
the main f.i. computer runs the idle valve but problems are usually related to input signals.common one is the fuel shut off microswitch mounted on the throttle linkage under the aircleaner.check and see if the plug has slipped off. the eha just needs to be replaced.unless one or other of the o rings under it leaks,replace it.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg |
Bookmarks |
|
|