|
|
|
#1
|
|||
|
|||
How to check overload protection relay for 190e 2.6, 1989?
I have a 190e 2.6, 1989, ABS light is on and will not go out, I checked the overload protection relay fuses and they are OK, I did put a new one, but still the ABS light is Oon during engin running, I have hard time to start the first time but after a while of running engine, it is fine, I thought it might be due to overload protection relay, but I do not know how to chech it? any help is appreciated.
Thanks |
#2
|
||||
|
||||
That's OVERVOLTAGE Protection Relay.
The ABS sensors on the front wheels may be 'shorted' out with metal filings. Pull them out and clean them, as well as the reluctor wheels.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#3
|
|||
|
|||
Thanks for correcting me
Do you have any picture, detail, diagram or refrence on the net of sensor locations? This is my first time working on MB, I hvae worked on other cars but not MB.
|
Bookmarks |
|
|