![]() |
|
|
|
#1
|
|||
|
|||
Hello,
I have a 1993 300SL (W129, 104 engine), when started from cold the car idles at around 1100rpm. After driving and warming up, when the gear selector is returned from D to N or P the idle RPM goes to 1500 - 2000 and stays there even after briefly depressing the accelerator. Any ideas as to what might be going wrong will be greatly appreciated. I have checked the throttle linkages and at idle they seem to be in the correct position. Many thanks in advance Valtcho |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Idle speed too high | lin | Tech Help | 2 | 06-11-2005 03:33 PM |
Can ignition switch cause 560sl high idle??? | 560slsteve | Tech Help | 6 | 08-30-2004 12:03 PM |
W126 medium high idle | Mattman | Tech Help | 9 | 08-07-2004 05:53 AM |
CIS injection - sporadic high idle | rgrayson | Tech Help | 4 | 11-11-2003 07:01 PM |
Return of idle problems - '91 190E 2.3 | sbourg | Tech Help | 11 | 05-19-2003 10:25 AM |