Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-14-2007, 01:52 PM
Old School Mechanic
 
Join Date: Dec 2006
Location: Auburn California
Posts: 127
Thanks Mike and estimate, long story short. retrying X92 got it to work right, nebie I think. No errors and got used to reading ratio. Getting the ratio was tricky, I think because the EHA was a little too rich. to get 10% between idle and 2000, I had to go to about 60% on my dwell meter 4cyl scale. I think the meter reads low because when I drop rpm from 2000 to idle, % freezes for a second or two at 45%, exactly midscale on the dwell meter. The meter has different scales for 4,6,8 cyl, but 8cyl scale reads 1/2 of 4cyl: 30%. Any help anyone as to dwell reading to %?

Finally found a good thread on the EHA and found the current at +.35+-.1. Scarry business the first time. 1/8cw made it worse: %up to 70%. Then went 1/4ccw (and found it easy to loose track of where the little allen screw was)

This worked good and tried another 1/8 to find for sure I had over shot the right place and started the 1/8 steps back. Each time you have to readjust the idle and 2000rpm ratio to <10%. The common point moves as you adjust the EHA. Mine had a sweet spot when the EHA was finally at 0+-.1, the ratio at 2000 magically fell exactly in the middle of the idle ratio.

Is that a good clue of when the EHA should be adjusted? When you adjust the idle ratio to 50% and the 2000 ratio is different and outside of the range of the change at idle???

End result: success. The resulting idle came in at 600 to sometimes 650 and timing is about 15 (If I remember right, its been a few days) with vacuum. Its been cold here so I'll check this again when weather is better.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page