|
|
|
#1
|
|||
|
|||
After I change oil + filter how do I reset the FSS warning which apears in the dashboard? This is for a 1999 E300 TD.
Thank you in advance!!!
__________________
pat201 |
#2
|
||||
|
||||
FSS reset procedure
It should be in your owner's manual. On my 1998 E 430 the process is clearly explained on page-93.
Make sure your doors are closed. 1) Insert key into ignition and turn to position 2. 2) Within 4 seconds push button "0" and release.(this is the odometer reset button) 3) Within 10 seconds turn key to position 0. 4) Press and hold button "0" while turning the key back to position 2. Continue to hold button "0". 5) After approx 10 seconds a signal sounds and the display will show 10000 miles or 15000 km. Release the button.
__________________
Bill Wood - Retired Webmaster My Personal Website 1998 Mercedes E430 2010 Toyota Sequoia My Photo Albums |
#3
|
||||
|
||||
This is correct, except step 2, you have to push the 0 button twice within 4 seconds or so to get the FSS to display......Gilly
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FSS resetting | steve hutson | Diesel Discussion | 16 | 05-26-2009 08:44 PM |
Fss Light Resetting How? | SATBIR | Tech Help | 1 | 07-21-2004 01:17 PM |
Oil Change...FSS did not extend mileage | johf | Tech Help | 3 | 12-27-2002 08:42 PM |
FSS Resetting | pat201 | Tech Help | 4 | 05-20-2001 08:27 PM |
Resetting FSS not in owners manual? | KenT | Tech Help | 2 | 02-26-2000 01:12 AM |