|
|
|
#1
|
||||
|
||||
500 SEC filter housing...
1984 500 SEC...small leak from the side of the oil filter housing.
New filter and gasket. Appears to have small crack at rim below lid. Just a drop or two...possibly over torqued the lid sometime in the past(Me or PO) and a crack is developing. Does anyone know for sure if the oil filter housing on a 500 engine is interchangable with that of a 380? This weekends trek to U Pull It revealed only two possible contenders. But the engines on both cars at the junk yard are 380's. Was not able to detect part number off the junkers. My car only had a # on the lid of the housing. I searched Rusty's, Drivewire, and Performance with no results for this part. I do not want to business with the dealers here in town. Very impersonal. Thanks for your help in advance. |
#2
|
||||
|
||||
i would suspect they are the same but i don't know.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
cdplayer
Quote:
So off to U Pull it again to score the housing. Only when I can inspect both units more closly will I be able,hopefully, to find matching part numbers. |
#4
|
||||
|
||||
i would pull with confidencs with that gasket info.
good sleuthing! tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#5
|
||||
|
||||
cdplayer
Thanks. I will keep you posted on my actual findings should this issue come up with another fellow Benz enthusiast.
|
Bookmarks |
|
|