![]() |
|
|
|
#16
|
|||
|
|||
Hi TX76513 can you elaborate on what you just said? Might be on to something some of us don't know about.
![]() |
#17
|
|||
|
|||
I believe he was referring to the fact that the steering wheel will be locked so don't plan on turning.
__________________
2012 E350 2006 Callaway SC560 |
#18
|
|||
|
|||
You mean its not possible to add a remote starter to the W124 without causing the steering to lock up?
|
#19
|
|||
|
|||
The steering wheel is locked mechanically until you turn the key.
__________________
2012 E350 2006 Callaway SC560 |
#20
|
||||
|
||||
If you are refering to the ire tool to remove the tumbler...
I made my own with a piece of wire. If I remember correctly, the tips have to be cut in a 45 degree angle in order to work...I may have the tool somewhere around my garage to take a picture...If I find it I will post.
__________________
J.H. '86 300E |
#21
|
||||
|
||||
What is this special tool? I need to change the lock cylinder in my wife's W124.
__________________
![]() "Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#22
|
|||
|
|||
The special tool is a piece of 2mm wire bent into a U shape. The sides should be 20mm apart. The inside tips should be ground/filed to a 70' angle.
__________________
2012 E350 2006 Callaway SC560 |
![]() |
Bookmarks |
|
|