|
|
|
#1
|
|||
|
|||
My 350SD 1991 is blowing oil out the exhaust pipe so bad that it will empty the oil in less than 2 minutes......I have replaced the Turbo because someone told me thats what it was but when I started it afterwards it done the same thing.........When it first happened the engine didnt miss out but it is now ( maybe because of all the oil?????? )
ANMY IDEAS?????????? |
#2
|
|||
|
|||
You will have to remove the head to find this one.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
|||
|
|||
My first bit of advice is not to drive the car until
you find out exactly what the problem is and don't put any more money into it until you get all the facts. Be very picky about the mechanic. Either go to the dealer or find someone who is very knowledgable in MB diesels. I have a 93 300SD that had an oil problem and required a rebuild due to a hyrdrolock (oil coming in to the #1 cylinder and the piston trying to compress it - the connecting rod loses). Given the oil-problem history of the 603 engine and the problem that I had, I suspect either 1) oil is coming in through the head gasket (as was the case with me) or 2) there is a problem with one or more of the cylinders being out of round. I doubt that your turbo charger had or has anything to do with the oil usage. MB does sell rebuilt engines that come with a warranty. At the time that I had my problem, none were available for my car so my only viable alternative was a rebuild. The mechanic who did my work did a great job. I have 63,000 miles on the rebuilt engine. I change the oil every 3,000 miles and use NO oil! The bad news is the expense. The good news is, if you do it right, you will have a great engine and car. Ralph Burnette 1993 300SD
__________________
Ralph Burnette 1993 300SD (286k + miles) 2000 SL500 2001 ML320 |
#4
|
|||
|
|||
I agree with Ralph....be very careful who you let work on your car...sounds like you have a major issue there...never heard of oil blowing out the tailpipe....just tons of smoke...my car before it was fixed would blow clouds of smoke espcially when it was full of oil...in my case connecting rods 1 and 6 were bent causing extreme blowby.
I had a complete MB engine(without turbo) installed at the dealer...Complete with a 48/50 MB warranty. MB I was told had made modifications on this engine ...be very careful who you let do the work and make sure they use the latest available parts....one of the cases where I think going to a dealer may serve you well...but the bad new is(I assume you have no warranty coverage)its going to cost you somewhere in the 9-10K range....expect to pay about 7500-8500 for the motor(depending on what the dealer sets the $) and about 26 hours of shop labor.. good luck Warren 1992 300SD 115K Columbus Ohio turner@greif.com |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1994 350sd... | oilslick | Diesel Discussion | 12 | 10-22-2004 08:23 AM |
going to buy either a 97 e300d or a 91 350sd tommorow(maybe) | wood_n_soldier | Diesel Discussion | 21 | 10-18-2004 02:56 PM |
350SD smokes like crazy | red67fairlane50 | Diesel Discussion | 20 | 11-01-2002 12:46 PM |
Fs : 1995 350sd (w140) | Potomac Pat | Mercedes-Benz Cars For Sale | 0 | 05-31-2002 08:50 AM |
300SD vs 350SD | joegolden | Diesel Discussion | 2 | 04-18-2002 10:40 PM |