|
|
|
#1
|
|||
|
|||
Passenger PWR seat will not move
Power seat on drivers side works fine but the seat on the passenger side is stuck all the way back. It will not move with the controls. I can not even hear the motors under the seat running when the controls are pressed.
Is each seat controled by an individual fuse? Is ther some way to manualy move the seat forward? What could be wrong, any ideas? Jeff
__________________
1989 190E 2.6L 6-Cyl |
#2
|
|||
|
|||
If no seat functions work it is prob a fuse, plug or bad motor. Fuses should be on your chart in the fuse box.
If some functions work such as back rest, or it goes back but not forward, it is prob dirty contacts in the control switch. Electrical contact spray cleaner will clean them usually. Debris in the tracks can also cause the latter.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#3
|
||||
|
||||
There is a control box under the driver's seat that has a bunch of relays in it. If someone spilled some liquid and it got into this control box, the relays' contacts will corrode.
__________________
Closing the store Benzbonz.biz on your smart phone or tablet. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|