I have just removed the water pump! Wow! If anybody else needs to do this take a week off from work and and be in a very relaxed mode before picking up a wrench.

I Need to replace the hex bolts on the water pump. Does anybody have a good source. I have checked at least 20 mb part web sites including the one here and I cannot even find a mention of these increbility hidden bolts. I am going to take the old ones and mount them in my garage and every time I see them it will remind me of just how little I am!

Thanks for any help anybody can provide.

J.D.

The MB part number for the bolts is 000912 008019.

__________________
2012 E350
2006 Callaway SC560

Thanks BREWTOO, you might be the only one on the planet with that information. Thanks again!

Not to hijack this thread. Does anyone know the part numbers for the following: (I have searched many online catalogs but cannot find them. The ones ones I can find are made by Raybestos.)

1991 300E Front brake caliper retaining bolts. These are the ones we remove for replacing brake pads (not the caliper mount) and then came precoated with locktite. I think it might come in a kit with four bolts and some rubber parts.

1991 300E rear brake hardware. Four pins and 2 retaining springs. I also think they come in a kit.

Thanks,

Front caliper bolt 000 421 07 71 (2 per side)

Front caliper bolt kit 001 420 13 83 (1 per side includes bolt above)

Rear dowel pin 000 991 97 60 (2 per side)

Rear spring 000 421 33 91 (1 per side)

__________________
2012 E350
2006 Callaway SC560

Thank you so much, brewto.