|
|
|
#1
|
|||
|
|||
need an assist
i have a 1991 300e 103.983 and would like to know if someone could help me in determining the correct torque for the bolts holding the rocker arm holding bracket? i see two values on mt cd manual 05-2190 has both 21 nm and 15 nm but the 21 is in the pictorial and the 15 is in the instruction.
thanks in advance larry perkins lou ky |
#2
|
|||
|
|||
The same numbers (15 or 21nm) are given in the CD repair manual.
If I had to do it, I'd go in between, i.e. 18nm. No one will see or feel the difference. |
Bookmarks |
|
|