![]() |
|
|
|
#1
|
|||
|
|||
![]()
Hi All,
Can someone please let me know what the ROTOR and BRAKE PAD wear limits are for both Front and Rear.... Thanks,
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels ![]() Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen ![]() |
#2
|
|||
|
|||
Is it....
stamped on the rotor? I'm guessing 22mm? Please someone respond....
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels ![]() Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen ![]() |
#3
|
||||
|
||||
I could look it up, but if you want to ride both to the limit then you should probably make an investment in the manuals. Otherwise, replace the pads before the wear sensor breaks through and replace the rotors at least once before your car gets to 120K miles.
__________________
Prost! ![]() |
#4
|
||||
|
||||
The min thickness for the rotors, I don't know off the top of my head, but as you said it will be stamped somewhere on the rotor itself (and probably covered in some brake dust).
The wear limit for the pads is 2mm for both the front and rear.
__________________
Ali Al-Chalabi 2001 CLK55 1999 Dodge Ram 2500 Cummins Diesel 2002 Harley-Davidson Fatboy Merlin Extralight w/ Campy Record |
#5
|
|||
|
|||
Rotor thickness
Thanks very much for the responses... I'll check them Asap...
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels ![]() Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen ![]() |
#6
|
|||
|
|||
94 C280 pad thickness... FYI...
Front limit is 19.4mm
Rear limit is 7.3mm
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels ![]() Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen ![]() |
#7
|
|||
|
|||
I doubt that the rear rotor minimum thickness is 7.3mm ... maybe 17.3mm.
__________________
Fred Hoelzle |
#8
|
|||
|
|||
Quote:
The rear rotors are non-vented, i.e. solid rotors & are less than 11 mm thick when new. ![]()
__________________
2007 C 230 Sport. ![]() |
#9
|
|||
|
|||
nice to see you Manny!
Yes, I did front rotors and pads last weekend 150k on orig fronts rotors, 90k on pads. Lots of hwy miles 120k-150k, replace frt rotors. Pagid pads are awesome. Brake dust means stopping power ![]()
__________________
former: 83 300D, 97 C230, 93 400E current: 08 C300 Luxury , 92 500SL |
![]() |
Bookmarks |
|
|