For those that have done the job on a w126, is it possible to replace the diaphragm on the center vent pod without removing the pod from its installed location?

Here a picture, such as it is, of the pod's position on the box.

Attached Thumbnails

 

__________________
The Golden Rule

1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later)

i have done it several times, the key is to get the diaphragm seated properyl or it will leak

__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins

Which one is the center vent pod?

__________________
2012 E350
2006 Callaway SC560

circled in red

Attached Thumbnails

 

__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins

thx for the responses. No one has responded to my question directly, but I take carson357 response as a yes. I think the hard part really is how to get to the center vent pod, let alone how to reamove and re-install it after replacing the diaphragm.