Hi guys,

I just purchased a 190E 2.6 which failed in CT emissions.
Limit Reading
HC 192 320
CO 0.62 7.74

Four things I plan to do but would like to know your opinion:
1. replace O2 sensor - Is there any way of checking this?
2. replace plugs - The car has H8DC's instead of H9DC's. Would this affect the reading?
3. air filter - I'll pitch this in just to be sure the engine's getting enough air. Lambda reading changed from 10.3V without filter to 6.5V with filter. Looks like a big jump. What do you think?
4. Oil change - Currently, oil isn't dirty but looks too thin. Also, cyllinder #2 is burning oil. I'm planning to use 20W50 synthetic to minimize oil leak.

Regards,

Ben
'88 190E 2.6

bump

That sounds like a real solid start. I bet that will do it.

__________________
-Marty

1986 300E 220,000 miles+ transmission impossible
(Now waiting under a bridge in order to become one)

Reading your M103 duty cycle:
http://www.peachparts.com/shopforum/showpost.php?p=831799&postcount=13
http://www.peachparts.com/shopforum/showpost.php?p=831807&postcount=14

How many kms on it?

You may have burned out your cat......

__________________
1989 300CE - 269,000 km
1994 SL600 - 59,000 km

It was suggested that I replace the cat but doesn't a failed cat manifest as a failure in NOx?

Whoopee!!! Just passed emissions!
----------HC-----CO-----NOx
Limit-----192-----0.62---1346
Test-----189-----0.20---1292

Did everything on the list except for the oil. Used dino instead of synth. Plus did a seafoam treatment on the intake and crank case plus adjusted lambda to 46%.

Thanks guys.