|
|
|
#1
|
|||
|
|||
w124 Removal of Air Filter Assembly
I need to check the part numbers of my fuel distributor and EHA etc. I know its underneath the air filter assembly, which I need to remove. How do I go about doing it? Yesterday I took off the cover and removed the filter to look at the assembly but didn't see any screws/bolts holding the
assembly down to the engine. Is it held in place by friction of the rubber piece connecting the metal assembly to the intake of the mass air flow meter that's on the fuel distributor? |
#2
|
|||
|
|||
I forgot to mention the car is 1987 260E 2.6L
|
#3
|
|||
|
|||
There are three 10mm nuts...two on the engine side and one underneath on the outside.
__________________
2012 E350 2006 Callaway SC560 |
#4
|
|||
|
|||
The one on the side is mounted sideways, and it is on the fender side, underneath.
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
Bookmarks |
|
|