|
|
|
#1
|
||||
|
||||
W210 Glove box door removal?
Hello all,
Quick question... How do you separate the front vinyl facing from the black plastic backing on a '97 W210 chassis glove box door? The latch has come loose inside and I can't quite figure out how to get at it . I've removed the screws at the top and the two clips at the hinges, but it sure feels like there is more holding it together and before I hear *snap* I'd like to get the advice of someone who has done this before. Thanks, Klaus
__________________
‘84 300TD “Mountain Goat” '62 300d Adenauer-350 Chevy - "Max" '15 VW Passat TDI '16 Dodge Ram 3500 - Cummins w/6-speed '68 Mustang fastback '55 T-bird ‘63 Studebaker Hawk |
#2
|
|||
|
|||
Maybe this will help (see #89) http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210225&M=606%2E962&GA=722%2E608&CT=F&cat=45Q&SID=68&SGR=200&SGN=03
There are plenty of threads around and DIY ariticles telling how to get the box out. Probably easiest to do that (and check your filters) and figure out the latch business on the work bench.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#3
|
||||
|
||||
Thanks for the reply. That diagram should help out...
__________________
‘84 300TD “Mountain Goat” '62 300d Adenauer-350 Chevy - "Max" '15 VW Passat TDI '16 Dodge Ram 3500 - Cummins w/6-speed '68 Mustang fastback '55 T-bird ‘63 Studebaker Hawk |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|