|
|
|
#1
|
|||
|
|||
What is the proceedure for replacing the 4 heater control levers in the dash of a 1971 280SL. Two levers control the temp, one controls incoming air and the last one controls the defrost/floor air diverter.
Is it necessary to remove the dash? Thanks for the help! |
#2
|
|||
|
|||
I've done it twice
First time I removed the glove box and the speaker with its grille. Very difficult to access levers this way. The second time I removed the duct assembly and blower from below the dash and this made accessing the entire control assembly much easier. As I recall, guiding the control cables into their stays in the levers was the only tricky part upon reassembly.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebuilding heater control valves on W108 | psfred | Vintage Mercedes Forum | 5 | 10-03-2002 12:49 PM |
250 SE under dash / heater control | Matba9 | Vintage Mercedes Forum | 0 | 12-19-2001 09:24 PM |
Heater Control Valve 79 300SD How do you re-sinc it and calibrate. | PeterG | Diesel Discussion | 0 | 12-16-2001 10:33 PM |
Heater Control Valve 79 300SD How do you re-sinc it and calibrate. | PeterG | Diesel Discussion | 2 | 12-16-2001 10:01 PM |
'81 380SL Heater Control questions | John J. | Mercedes-Benz SL Discussion Forum | 0 | 09-06-2001 10:31 PM |