|
|
|
|
|
#1
05-25-2005, 03:11 PM
|
|||
|
|||
|
96 C280 with no Injector pulse
I have here a fine example of a butchered motor swap.
After the offending tech installed the motor it faied to run... The Fix: New Crank Senesor, repair to harness for crank sensor. Now this beast has been out for about 2 months and it returned with no injector pulse. I have limited data on Mercedes as I am using Mitchell  Which has been of very little help.I have spark, I have fuel pressure, I have compression, I have power to the injectors. What I do not have is the ground pulse to fire the injectors. The cam sensor has been replaced, the ECM has been swapped, all ground and power wires I can trace via Michell has been done and are O.K. What am I missing here??? 
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1994 C280 | JennyLovesMB | Tech Help | 31 | 11-02-2009 11:00 PM |
| W202 C280 ABS Light on and not shifting | jferrell | Tech Help | 4 | 08-19-2004 01:05 AM |
| new to us 95 C280 | greasy griddle | Tech Help | 1 | 08-04-2004 09:50 PM |
| 1994 C280 Mercedes [I posted in wrong forum before sorry :( ] | JennyLovesMB | Off-Topic Discussion | 2 | 07-24-2003 06:15 PM |
| P/S Filter on a 96 c280? | 96C280 | Tech Help | 1 | 02-10-2003 03:27 AM |
Threaded Mode
