|
|
|
#1
|
|||
|
|||
transmission question
hi.. i have a question my 1986 300e benz transmission is flaring from 2-3 bad going slow, but if i take of fast in first gear flooring it, it shifts fine anyone know what this could be thanks for the help.
|
#2
|
|||
|
|||
Code:
Transmission Slips During 2-3 Upshift Or Slips Initially, Then Grabs Hold Check modulating pressure and adjust (if necessary). Check for temperature throttle installation (if equipped). Valve body worn or damaged. Replace valve body (if necessary). Replace inner plates of clutch K-1 or recondition clutch (if necessary). Check front cover Teflon ring.
__________________
1993 400E, 256,000 miles (totaled) 1994 E420, 200,000+ miles 1995 E420, 201,000 miles |
#3
|
|||
|
|||
The coordination of engine vacuum & modulator pressure is most likely the problem.
Possibly the wrong modulator is installed.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#4
|
|||
|
|||
#2 and 3 hit it
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#5
|
|||
|
|||
transmission problems
yes.. i think your right because when im driving before the gears change i can here some air comming from somewhere, im thinking its the vacuum hose to the modulator thanks for the help i ll let you know.
|
Bookmarks |
|
|