Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 10-23-2007, 10:30 AM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,456
Quote:
Originally Posted by xtreme barton View Post
you guys see any problems with me using these wires on my 88 300se ?
http://performanceparts.com/part.php?partID=216375

here are the boots i can get to use with them

http://www.***************/search/product.aspx?sid=sdqj4k451xunt33tdcodnvic&makeid=800016@Mercedes&modelid=1194094@300SE&year=1988&cid=25@Ignition%20Parts&gid=7227@Spark%20Plug%20Connector

i already had these wires laying around so i thought i should put them to use ..

also can anyone link me to a good after market coil

thanks
I ordered a complete (supposedly OE) Bosch system from ******** for my '72 350SL.

The distr cap and rotor are OE type.

The wires are Bosch Premium (Opt-Layer Mag) and plugs are Bosch resistor type. The wires do not have resistors built in and are not copper. Box is contradictory in that it says wires are stainless steel spiral wound for American and Asian cars only but also says they are for Mercedes V-8 engines!

Original '72 vintage wires had resistors built in to end fittings - 6kohms at one end and 1.6 kohms at other and presumably copper wire between. Plugs were non-resistor type.

Total resistance of original system was about 8 kohms. New wires are 1.6 kohms and with plugs may be about same as originals. I wonder if it makes any difference what wires we use, so long as overall resistance of circuit from coil to plug tip stays approximately the same??

I went ahead and installed the new parts. All I can say, is that the car is running well and that it does not miss from idle up to max revs. No interference on radio. One experienced MB technician says my set up is fine and he has been working on MBs all his life.

I still have original blue coil. I have been thinking about switching to Pertronix point-less ignition (Ignitor). They sell a coil that goes with their system for about $40.00. have not determined yet if this would be suitable for our car. But, you should be able to get an OE equivalent coil from any of the on-line vendors.

Last edited by Graham; 10-23-2007 at 12:14 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page