|
|
|
#1
|
|||
|
|||
124 Trunk Bumpers ?
I know this is small potatoes, but I was looking at the small black plastic or hard rubber bumpers or guides which are on either side of the trunk opening on my '95 E300D, and those babies are really deteriorated.
I'm not sure how or why this happens - they are obviously out of the light (ultraviolet) when the trunk is closed, which is the situation 99.99999% of the time, and they don't seem to be subjected to much stress, but they are starting to really fall apart. The trunk lid might start rattling at this rate... Anyone replaced them or have other comments? Rgds, Chris W. |
#2
|
||||
|
||||
All three of my 124s show this. As an experiment I bought some rubber coating for tool handles and painted one set with that (bright red!) It is holding up well. On another, I scraped the old coating off, not hard to do, and simply put foam insulation on the mating surfaces -- also serving the purpose and holding up OK. On the five speed euro, number 3, I have yet to get to this small of a detail yet
__________________
W108M117(1972) repaired after deer hit W124M103(1987) W124M103(1989) -- sold to son's friend W124M119(1993) -- W124M103(1987 -- 5 speed Euro) - sold to forum member W124M103(1989) -- TE W123OM616(1977) W201M103(1990) parts car |
#3
|
|||
|
|||
all three of ours need those things as well.
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k 1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC] |
#4
|
|||
|
|||
Any part # ?
Thanks!
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011 --------------------------------------------------------- 1989 300CE - R.I.P. Dec 29 2007 Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE |
#5
|
||||
|
||||
__________________
'86 300E 5 speed '71 Triumph TR6 '46 Cushman Scooter '41 Ford 9N tractor |
#6
|
||||
|
||||
Me three
__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein 09 Jetta TDI 1985 300D |
#7
|
|||
|
|||
__________________
Duke '84 380SL |
#8
|
||||
|
||||
Here is the part
Item Number: 2019870440
Main Category: MB Sub Category: Body Trim Description: Rubber Buffer, Rear Lid Stiffening Manufacturer: OEM Weight: 0.100 Have a great day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ Last edited by whunter; 03-29-2010 at 01:48 AM. |
#9
|
|||
|
|||
I ordered a set of these from Phil in October of 2006. The above referenced part number is not correct. As I recall, the total cost for the set was about $20.00.
J. M. van Swaay |
#10
|
|||
|
|||
Mr. Hunter:
Just checked my receipt file. These bumpers were my order number 67594 of 10 October 2006. Unfortunately the receipt does not list the part numbers. Maybe you can find them in your database. J. M. van Swaay |
#11
|
||||
|
||||
Phil Responds!
These part numbers are for a 1986 300E
TWO PARTS 124 758 00 44 ON DECK LID $4.20 EA 124 758 01 44 ON FENDER $5.00 EA Thank you Call for parts Phil 1 888 333 4642
__________________
'86 300E 5 speed '71 Triumph TR6 '46 Cushman Scooter '41 Ford 9N tractor |
#12
|
||||
|
||||
Hmm
Thought he needed the Buffers.
Here are links to the correct parts. Item Number: 1247580144 Main Category: MB Sub Category: Body Trim Description: Rear Lid "STOP", Mounts to Rear Fendor Weight: 0.100 Item Number: 1247580044 Main Category: MB Sub Category: Body Trim Description: TRUNK STOP Weight: 0.100 Last edited by whunter; 03-29-2010 at 01:46 AM. |
Bookmarks |
|
|