If it's not my W210 causing problems, it's my W124.

I've only just got it back on the road, the other week the pulley on the tensioner sheared off it's mount and it's only been today that I've been able to fully re-assemble everything and get it going.

On it's first post-repair road test, I noticed that there were some drips of water coming from the plastic trim that surrounds the driver & passenger dome light, the 'fasten seatbelt' warning sign and the sunroof controls.

Could this be a sunroof seal that's going bad, or the seal around the top of the windshield that's on it's way out?

__________________
--
Steven Harrison

1993 300E2.8 - 196K
2001 E320 4MATIC - 86K

I will suspect sunroof drain first. Good luck.

__________________
Roman
_____________
87 300SDL 152K
86 420SEL 228K
83 280SL 145K (5 spd)
_____________

Where are the drain tubes? I know they run through the A and C pillars, but where are are they in the roof?

I noticed in this thread that the sunroof seal is not watertight.... an intriguing design, is the W210 with it's glass sunroof the same way?

__________________
--
Steven Harrison

1993 300E2.8 - 196K
2001 E320 4MATIC - 86K