yes both have runout I am thinking of swapping the left and right hub. Im pretty sure it wont make a difference. Its hard to beleive that two (old compared to new) parts would having the exact same issue. but its there Ive verified it a couple times. The hub shows no more than normal bearing play on either side with the tire on. Im stumped.

The hub runout is not so bad but the system gets very exagerated when the rotor is in place due to the increase in diamater.

The spindle was not discolored or spawled at all
the mating suface swere new since both rotor and hub were new no burs rust ETC.