|
|
|
#1
|
|||
|
|||
C43 Airbox Filter Change
I have the airbox off my car but I don't know if I need to use
a specific torx bit on the screws. I have a T15, T20, and T25 but they don't seem to get the correct bite. Am I using the right tool or is there some special size only manufactured by the MB elfs? Thanks Chas. |
#2
|
|||
|
|||
I cant remember what size it is but they are not difficult to remove, they should come out relatively easy even if you can get close to the correct size. I just have a standard Craftsman torx bit set and had no trouble finding the correct size???
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hydraulic filter change on E320 Wagon? | slilley | Tech Help | 4 | 09-27-2021 07:02 PM |
fuel filter change | Phil | Diesel Discussion | 73 | 10-08-2006 12:10 PM |
ml/plug, fuel filter change | cerbomark | Tech Help | 5 | 01-30-2004 05:42 PM |
oil filter change on 606 | slowmoe | Diesel Discussion | 8 | 08-02-2003 06:23 PM |
C43 sparkplug / air filter change | Lonestar C43 | Tech Help | 4 | 03-07-2003 06:53 PM |