Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 04-14-2008, 06:47 PM
Jim Villers's Avatar
Registered User
 
Join Date: Jan 2000
Location: Virginia Beach, VA
Posts: 490
Arthur .... A scope would be nice. I tried testing the coil with my inductive timing light. I should have done this before but I kept putting the cover on before I reinstalled the air duct and then it was too late.

The results were not what I was expecting. With the pickup over the plug wire from the coils, the "bad" coil flashed but appeared to flash at about half the rate of the other coils and not consistent. I had expected that the bad coil would not flash at all. I can't imagine why a "bad" coil would flash at a different rate; either it should flash or not. I thought that the high voltage plug wires would come from the same point within the coil. Could the computer be not firing the coil because of something else?

Anyway, I'll get a new coil tomorrow and hope that an "Eureka moment" occurs in the driveway.
__________________
Jim Villers
190SL, 230SL 5-speed, 95 E320 Wagon, 01 E320 Wagon, MGB, Boxster 'S', 190SL "Barn Find"
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page