Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-02-2007, 08:16 PM
Registered User
 
Join Date: Jul 2006
Location: jax fl
Posts: 6
s500 w140 no crank

Hello all. My 1994 s500 will not crank over. The dash lights all light up, battery tests good with load tester, no voltage drain when key is in crank position. It's just like a bad nss (I have tried starting it in neutral). I also tried locking and unlocking the door with the key. There is no click at all when key is turned. My question is, how do I diagnose the alarm vs nss, and can the nss be bypassed for diagnistic purposes. The car has had the underhood harness replaced about 2k ago and has only 66k original miles. Any ideas on how to do this or anything eldse that could be causing this condition would be appreciated.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page