does anyone know where the crankshaft sensor location is on a c280 sport 2000. thanks.

Looks like it is on the drivers side of the bell housing like usual.

http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=202029&M=112%2E920&GA=722%2E606&GM=717%2E465&CT=M&cat=19X&SID=15&SGR=075&SGN=04

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

thanks I will take a look.

While technically a very easy swap, in practical terms a somewhat annoying repair but very doable. Very tight back there, hopefully you have small hands. Torx fitting, IIRC T-8.

Are you having the random no start and the SSS (sudden stall syndrome)?

glenmore
2000 C280
1991 300CE
1990 LS400

yes that is exactly what I am having. I found it now i just have to get it out.

I found it isn't a T-8 that is used for electronics. it might be an E8 and that didn't work either. real pain to get out. I decided to bring it to a shop. I tried all kinds of sizes nothing seemed to fit. real pain.