I plan to replace both rear Control arms on my car W124 original from 1988.I never did it so far.

Is a wheel alignment mandatory or can they be replaced without?



In advance many thanks for replies and advices.

Attached Thumbnails

 

__________________
Keep us posted especially if your problem is solved
Present cars:
My car: E-class 420CDI, 2008, W211, V8, 180 000km

Wife's one: C-class 220CDI Sport Coupé, Euro, 2002, W203. 345 000km

Son's one: GLK class 220CDI, 2009, W204

Sold E class 260E, W124, 1988 beloved car sold after 489 000 kilometres of reliable services (engine M103, clutch and 5 speed manual gear box all original).

E-class, W210 320CDI, 2000[/B], 225 000km, Sold

Always advisable to have alignment checked.

However replacement of the lower arm will have no affect on rear toe-in alignment.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks you M.B.DOC for this quick reply.

May this repair modify the other two angles (camber ? and caster? ).

__________________
Keep us posted especially if your problem is solved
Present cars:
My car: E-class 420CDI, 2008, W211, V8, 180 000km

Wife's one: C-class 220CDI Sport Coupé, Euro, 2002, W203. 345 000km

Son's one: GLK class 220CDI, 2009, W204

Sold E class 260E, W124, 1988 beloved car sold after 489 000 kilometres of reliable services (engine M103, clutch and 5 speed manual gear box all original).

E-class, W210 320CDI, 2000[/B], 225 000km, Sold