PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   '89 190e 2.6 Crank Angle Sensor (http://www.peachparts.com/shopforum/showthread.php?t=226463)

umail 06-30-2008 05:23 PM
'89 190e 2.6 Crank Angle Sensor
 
Could someone please tell me where the Crank Angle Sensor is located on a '89 190e 2.6 ....


Thanks,
Umail

mbdoc 07-01-2008 08:15 AM
At the rear of the engine behind the oil filter housing area.

umail 07-01-2008 12:57 PM
Is that the object that seems to attached at the base of the oil filter? It has a one prong connector attached.

slk230red 07-01-2008 02:00 PM
Quote:
Originally Posted by umail (Post 1898423)
Is that the object that seems to attached at the base of the oil filter? It has a one prong connector attached.
Probably....just to be sure, trace the other end to make sure it goes to the Ignition Control Module.

umail 07-01-2008 08:49 PM
Thanks a million to both of you ...found and removed it.

It had a lot of oil on probe ... is that normal or reasonable ?

rurlndum 07-02-2008 03:07 PM
Oil pressure sender?
 
Make sure you haven't removed the oil pressure sender instead of the crank angle sensor.


All times are GMT -4. The time now is 05:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website