|
|
|
#1
|
|||
|
|||
1997 MB E320 brake pads replacement
Is there anything special or different about changing the brake pads on this model car. I've replaced a few on other cars but never a Mercedes. Anything i should watch out for? Can i just get parts from a regular auto parts place? Any help would be appreciated
|
#2
|
|||
|
|||
pretty simple. It will be self evident when you see the clip/spring.....
Might want to get new wear sensors.. as they are cheap http://catalog.worldpac.com/mercedesshop/sophio/image.jsp?title=Brake%20Pad%20Sensor&url=http%3A//img.eautopartscatalog.com/live/N103026105PEX.JPG Some simple tricks.... Just open each bleeder and push the pistons back all the way in using the old pad and a lever between the pad and disc [ screwdriver works]..then close the bleeder and drop in the new pads and wire them up..opening the bleeder makes piston movement back into the caliper much easier and it also gets rid of the crap in the caliper , thereby not allowing it to be pushed back up the line...plus you will not have to watch the res level b/c it will not change/overflow due to piston displacement change required to accomodate the thicker new pads.. You can get the correct parts right here at the top of this page.
__________________
A Dalton Last edited by Arthur Dalton; 07-08-2008 at 04:35 PM. |
#3
|
||||
|
||||
If you need more info, step by step directions here:
http://www.benzworld.org/forums/w210-e-class/1278146-diy-brakes-pictures.html |
Bookmarks |
|
|