hello everyone
i had my vacuum pump repaired on my 1998 benz c200. reinstalled, the motor runs when i use the remote but that that is all it does..."runs" nothing works.
the rear headrest, door lock, nor trunk. as if that was not enough problem, i
took off the hoses to the vacuum unit so many times until i am confused what
goes where. i have a connector with 3 yellow hoses, and a set with 3 white hoses and two single yellow hoses in other words 4 lines to go back on the vacuum housing. perhaps we can start from the proper connections.
please help.

rodney

Central locking is always yellow (ZV).

Rear headrests are white (FKS)

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

thank you for your response.
but what goes where? i have 4 output marking which are #1 BFT/FOND, #2 FT, #3 TANK
AND #4 HECK/KAF. also what about the lock/unlock problem
can you help with that also?
thanks