|
1988 260e Brake issue
When the vehicle get to operating temperature, I loose the pedal, having to pump it two or three times to get a brake.
Good pads, front and rear, fluid level correct. Any suggestions? |
Loss of hydraulic static pressure. Try bleeding the brakes & even flush a pint OR more fluid thru the system.
MB suggests a fluid flush every 2-3 years. IF you see no difference...most likely the master cylinder is the problem. |
| All times are GMT -4. The time now is 08:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website