|
|
|
#1
|
|||
|
|||
1988 260e Brake issue
When the vehicle get to operating temperature, I loose the pedal, having to pump it two or three times to get a brake.
Good pads, front and rear, fluid level correct. Any suggestions? |
#2
|
|||
|
|||
Loss of hydraulic static pressure. Try bleeding the brakes & even flush a pint OR more fluid thru the system.
MB suggests a fluid flush every 2-3 years. IF you see no difference...most likely the master cylinder is the problem.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|